IS A GRINDING MACHINE IDEAL FOR LARGE INTERNAL GRINDING: THIS INTERNAL GRINDING MACHINE IS DESIGNED FOR COMPONENTS FROM MEDIUM TO OVERSIZE WORKPARTS THAT REQUIRE HIGH RIGIDITY FROM THE MAIN MACHINE UNITS AND EXCEPTIONAL PRODUCTIVITY.
NOVAMATIC 4G
Model
Standard machine range
NOVAMATIC 4G R
Ø 80 – 200 mm ≠ 80 mm
NOVAMATIC 4G P
Ø 50 – 225 mm ≠ 125 mm
NOVAMATIC 4G-S P
Ø 80 – 440 mm ≠ 200 mm
NOVAMATIC 4G WHEELHEAD UNIT
This equipment consists of two cross-mounted slides that provide maximum rigidity, known as “the cube“, with each slide moving on four preloaded and lubricated V roller guideways.
Precise control of X and Z slide movements is enabled through linear measuring systems that offer sub-micron resolution. The wheelhead unit is fully isolated from the working area.
WORKHEAD UNIT
The workhead unit is mounted on a swiveling plate that can be adjusted manually for convenient setup and changeover.
It can feature a roll-shoe centering fixture with an integrated load/unload system, a mag-drive shoe-centerless device with an integrated automatic loader that enables load/unload times below 1.5 seconds, or a diaphragm chuck type clamping fixture with enveloping jaws that allows direct mounting of a diamond ring on the workhead for wheel dressing.
Roll-shoe centering fixture with integrated automatic loader.
Magnetic drive shoe-centerless system.
Diaphragm chuck type clamping fixture with enveloping jaws or collets.
DRESSING UNITS
SINGLE-POINT DRESSER:
for single-point dressing, this equipment offers holders for one, two, or three diamonds, depending on the desired wheel profile.
DIAMOND ROLL DRESSER the diamond roll dresser operates hydraulically to move up and down. Dressing occurs through a plunge system with a profiled roll, or through interpolation of machine axes with a forming roll.
DOUBLE-FULCRUM ROTARY DRESSER to achieve wheel radius profiles with form errors less than 1µ, this equipment can support a fixed holder for up to three single-point diamonds or an electric spindle with diamond disk.
The dresser holder rotates electrically, driven by an AC motor through a gear reducer and encoder (E axis).
TURBINE: the electric spindle is taylored to dressing CBN wheels using a diamond cup wheel. These are all these reasons, NOVAMATIC 4G can be considered the perfect solution on the market for the choice of large internal grinding machines. Hydraulically controlled electric spindle for the dressing of CBN wheels by means of a diamond cup wheel.
DIAMOND ROLL DRESSER the diamond roll dresser operates hydraulically to move up and down. Dressing occurs through a plunge system with a profiled roll, or through interpolation of machine axes with a forming roll.
DOUBLE-FULCRUM ROTARY DRESSER to achieve wheel radius profiles with form errors less than 1µ, this equipment can support a fixed holder for up to three single-point diamonds or an electric spindle with diamond disk.
The dresser holder rotates electrically, driven by an AC motor through a gear reducer and encoder (E axis).
TURBINE: the electric spindle is taylored to dressing CBN wheels using a diamond cup wheel. These are all these reasons, NOVAMATIC 4G can be considered the perfect solution on the market for the choice of large internal grinding machines. Hydraulically controlled electric spindle for the dressing of CBN wheels by means of a diamond cup wheel.
ACCESSORIES
Automatic loader and workpart load/unload conveyors
Automatic taper correction device
Acoustic emission system for gap elimination
Acoustic emission system for wheel-to-dresser contact control
High-frequency wheelspindles with hybrid bearings
Quick-changeover device for off-line setup
Nova CNC control specifically designed for optimum grinding performance
Industry 4.0 ready
Automatic taper correction device
Acoustic emission system for gap elimination
Acoustic emission system for wheel-to-dresser contact control
High-frequency wheelspindles with hybrid bearings
Quick-changeover device for off-line setup
Nova CNC control specifically designed for optimum grinding performance
Industry 4.0 ready
ADDITIONAL ACCESSORIES
In-process electronic sizing unit
Post-process electronic sizing unit
Possibility to equip the machine with Siemens or Fanuc CNC controls
B axis for the grinding of diverging lips with an angular displacement of +/- 0,5°
Quick-changeover device for off-line workhead setup
Automatic grinding cells for workpart load/unload
Workpart demagnetizer
Vibratory bowl feeder for automatic workpart load
Pneumatic-controlled driver grinding device
Post-process electronic sizing unit
Possibility to equip the machine with Siemens or Fanuc CNC controls
B axis for the grinding of diverging lips with an angular displacement of +/- 0,5°
Quick-changeover device for off-line workhead setup
Automatic grinding cells for workpart load/unload
Workpart demagnetizer
Vibratory bowl feeder for automatic workpart load
Pneumatic-controlled driver grinding device
